{"product_id":"a-160-2-clock-trigger-divider-ii","title":"Doepfer - A-160-2 Clock\/Trigger Divider II","description":"\u003cb\u003eManufacturer Description\u003c\/b\u003e:\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eModule A-160-2 is an enhanced version of the standard clock divider A-160. The module is a frequency divider for clock\/trigger\/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Clock input will take any digital signal from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface. At the outputs, you have access to three sets of seven different sub-divided clock signals, from half the clock frequency down to 1\/128. The low\/high levels of the output signals are 0V and about +10V. The A-160-2 also has a reset input. Whenever a reset signal is sensed, all outputs are set to certain levels which depend upon the selected mode.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThese are the most important features of the module:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThree different sets of dividing factors, selected by a three-position switch at the front panel:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003epower of two: 2, 4, 8, 16, 32, 64, 128\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eprime numbers: 2, 3, 5, 7, 11, 13, 17\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003einteger: 2, 3, 4, 5, 6, 7, 8\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTwo output modes, selected by a two-position switch at the front panel:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGate mode: outputs act like the outputs of typical binary dividers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTrigger mode: in this mode the outputs are AND-wired with the clock signal (i.e. the clock pulsewidth affects the pulsewidth of the outputs)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eClock edge type selected by a jumper on the pc board:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003epositive: the rising edge of the clock signal triggers the state change of the outputs\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003enegative: the falling edge of the clock signal triggers the state change of the outputs\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eReset behaviour by two jumpers on the pc board:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003elevel triggered: the level at the Reset input triggers the Reset\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eedge triggered: the edge of the signal at the Reset input triggers the Reset\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003epositive: a high level (\u0026gt; 2.5V) or the rising edge at the Reset input triggers the Reset\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003enegative: a low level (\u0026lt; 1 V) or the falling edge at the Reset input triggers the Reset\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOutput polarity selected by a jumper on the pc board:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003epositive: non-inverted outputs\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003enegative: all seven outputs are inverted\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Doepfer","offers":[{"title":"Default Title","offer_id":54725922849109,"sku":null,"price":58.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1071\/1872\/3413\/files\/a160-2.jpg?v=1787442501","url":"https:\/\/climivor.myshopify.com\/products\/a-160-2-clock-trigger-divider-ii","provider":"CLIMIVOR","version":"1.0","type":"link"}